BOLT FS360DME Central Motor for Roller Shutter Doors

The central motor for roller shutter doors is an electric drive solution for compatible rolling shutter systems that use a central shaft-mounted mechanism. The BOLT FS360DME is a product option for door automation installers, building hardware distributors, rolling shutter manufacturers, and importers sourcing motor components for residential and commercial applications.

Listed for product sourcing through Pinpoki, this motor can be evaluated for compatible rolling shutters where the motor's torque, shaft arrangement, limit-control mechanism, and electrical specifications match the installation requirements. Before placing an order, confirm the precise model designation and the current product datasheet with the supplier.

Central Motor for Roller Shutter Doors: Drive Design

A central motor operates through a drive mechanism connected to a compatible rolling shutter shaft. When activated, the motor rotates the shaft to raise or lower the shutter curtain.

This type of drive differs from a tubular motor installed inside a roller tube or a side-mounted operator connected through a separate drive arrangement. Buyers should identify the existing shutter system before choosing a replacement motor.

The suitability of a central motor depends on the complete mechanical assembly, not just the motor's nominal torque. Important factors include shutter dimensions, curtain weight, shaft diameter, pulley or crown configuration, spring balancing, friction, and operating frequency.

For replacement projects, provide the supplier with the existing motor designation, shaft measurements, mounting arrangement, and available installation space. Where these details are uncertain, a qualified installer should assess the existing system before the motor is selected.

Torque and Speed for Rolling Shutter Applications

Public specifications for the related BOLT F360 DME model list a rated torque of 360 N·m and an output speed of 10 rpm. These figures are useful reference points when comparing motor options, but they should be confirmed for the exact FS360DME model before being used in a purchase order.

Torque describes the motor's rotational output. It does not independently determine the maximum shutter weight or guarantee suitability for a particular door.

The door's geometry, weight, balancing system, shaft arrangement, and mechanical resistance all affect motor selection. Buyers should therefore provide the shutter width, height, approximate load, shaft size, and operating requirements when requesting a quotation.

If the motor will be used for a large commercial shutter or frequent daily operation, ask the supplier to confirm the recommended application range and permitted duty cycle. The correct selection should be based on the manufacturer's documentation and the complete door system.

Shaft Compatibility and Mechanical Installation

The public F360 DME product information lists compatibility with 48 mm and 60 mm shaft arrangements and a 220 mm pulley. These dimensions should be treated as reference specifications until the supplier confirms that they apply to the FS360DME variant.

A compatible installation requires the motor, shaft, drive components, supports, and shutter balancing mechanism to work together as an assembly. A mismatch in shaft diameter or drive geometry can prevent proper installation or place unwanted strain on components.

The related product description also lists a shaft reducer and an extruded aluminum crown. It identifies steel gears and bearings, with the crown mounted on a double-ball-bearing arrangement.

When comparing products, request a dimensional drawing and a list of included drive components. Confirm whether the quoted product includes the reducer, mounting hardware, and other required mechanical parts, or whether any accessories must be sourced separately.

Limit Adjustment and Emergency Manual Release

The published F360 DME specification describes quick adjustment of the upper and lower travel limits. Limit adjustment determines where the shutter stops at its fully open and closed positions.

Correct limit settings are important for reliable operation and should be configured according to the manufacturer's instructions. Buyers replacing an existing motor should confirm the adjustment mechanism, maximum travel range, and setting procedure for the selected model.

The public product information also describes a locking and unlocking mechanism for emergency manual opening when electrical power is unavailable. Confirm the exact release mechanism and the parts supplied with the motor before purchase.

Manual release should be operated only in accordance with the manufacturer's instructions and when the shutter can be handled safely. The condition and balance of the door remain important to safe manual movement.

Electrical Specifications and Operating Conditions

The public F360 DME reference lists a 230V supply, a four-pole asynchronous motor rated at 1,400 rpm, Class B insulation, and thermal protection listed at 160°C. It also gives an operating temperature range of -20°C to +85°C.

These values are reference information for the F360 DME designation. Before ordering the FS360DME, verify the actual voltage, frequency, power consumption, current, insulation class, thermal protection, and environmental limits on the current datasheet and motor nameplate.

Electrical requirements must match the installation site and applicable local regulations. Wiring, commissioning, and service should be carried out by qualified personnel in accordance with the manufacturer's instructions.

A compatible control unit may be required for full automatic operation. The related F360 DME documentation describes the central motor as a motor unit requiring a separate compatible controller. Confirm whether a controller, remote controls, wall switch, safety devices, and wiring accessories are included in the actual quotation.

Do not assume that the motor is a complete automatic shutter system unless the product package explicitly includes the necessary controls and accessories.

Applications for Commercial Rolling Shutters

A central motor can be suitable for rolling shutters when the drive arrangement and mechanical design match the installation. Potential applications include shopfront shutters, garage shutters, commercial premises, and other compatible rolling door systems.

Different installations impose different requirements. A shutter used in a small retail opening may have different load and duty requirements from a large commercial opening operated repeatedly throughout the day.

For this reason, buyers should confirm the maximum approved application, recommended shutter dimensions, operating frequency, and duty limitations rather than selecting the motor from a headline torque value alone.

For new installations, the shutter manufacturer or installer should verify compatibility between the motor and the complete shutter assembly. For replacement work, the existing shaft arrangement and balancing system should be checked before the order is finalized.

Wholesale Central Motor Sourcing Through Pinpoki

For rolling shutter installers, door hardware wholesalers, building-material distributors, and importers, sourcing a central motor involves both technical verification and commercial evaluation.

When requesting a quotation, provide the motor model, required quantity, shutter dimensions, shaft details, destination market, electrical requirements, and any relevant installation constraints. Ask the supplier to confirm the exact model designation, torque, speed, mechanical dimensions, included components, and controller compatibility.

Pinpoki helps international buyers discover products and explore potential suppliers. The Pinpoki product catalog provides a starting point for researching available products and sourcing options.

Before placing an order, confirm pricing, minimum order quantity, sample availability, lead time, payment terms, shipping arrangements, warranty conditions, and spare-parts support. Compare supplier offers against the same technical specification so that differences in components and included accessories are clear.

What to Confirm Before Ordering

Before purchasing the BOLT FS360DME central motor, confirm the following details:

• Model identification: Verify whether the product is FS360DME or F360 DME.
• Torque and speed: Confirm the rated torque, output speed, and permitted duty cycle.
• Mechanical compatibility: Check shaft diameter, pulley or crown dimensions, reducer, mounting arrangement, and shutter balancing.
• Limit adjustment: Verify the upper and lower travel limits and adjustment procedure.
• Emergency release: Confirm the manual-release mechanism and included parts.
• Electrical requirements: Check voltage, frequency, current, power, insulation class, and thermal protection.
• Package contents: Confirm whether a controller, remotes, safety devices, and installation accessories are supplied separately.
• Commercial terms: Review the price, minimum order quantity, lead time, warranty, and replacement-part availability.

Confirming these details before ordering helps reduce the risk of purchasing a motor that does not match the intended rolling shutter system.

Frequently Asked Questions

What is a central motor for roller shutter doors?

It is a motor designed to operate a compatible rolling shutter using a central shaft-mounted drive arrangement. Suitability depends on the shutter's mechanical structure, balancing system, shaft, and operating requirements.

What torque and speed are listed for the BOLT F360 DME?

A public F360 DME product reference lists 360 N·m torque and 10 rpm output speed. Confirm that these values apply to the exact FS360DME model before using them in a purchase specification.

Which shaft arrangements are listed as compatible?

The public F360 DME reference lists 48 mm and 60 mm shaft arrangements and a 220 mm pulley. Confirm the dimensions and included drive components with the supplier before ordering.

Does the motor include a controller?

Not necessarily. The related F360 DME documentation describes the motor unit as requiring a separate compatible controller for full operation. Confirm the quotation's package contents before purchasing.

Can the motor be operated manually during a power failure?

The public product description lists a locking and unlocking mechanism for manual opening. Confirm the exact release mechanism and operating procedure for the model being supplied.

How can I source this central motor through Pinpoki?

Use the Pinpoki catalog to explore available products and sourcing options. Provide the supplier with your shutter specifications and request the current datasheet, installation requirements, quotation, and package details before placing an order.