FRCABLE EN 50618 H1Z2Z2-K Solar Cable 1500V

The EN 50618 H1Z2Z2-K solar cable from FRCABLE is designed for photovoltaic DC wiring applications where cable construction, voltage rating, and environmental performance must meet the requirements of the installation. Listed on Pinpoki, this product is an option for solar project developers, EPC contractors, PV system integrators, electrical distributors, and wholesale buyers sourcing photovoltaic cable from China.

The published product specifications identify a stranded tin-plated copper conductor, cross-linked insulation, and a cross-linked outer sheath available in black or red. The cable is listed with a rated voltage of 1500V DC and references both EN 50618 H1Z2Z2-K and IEC 62930. Buyers should verify the current datasheet and applicable certification documents for the exact cable size before specifying the product for a project.

EN 50618 H1Z2Z2-K Solar Cable for PV Systems

An EN 50618 H1Z2Z2-K solar cable is intended for photovoltaic cable applications covered by EN 50618. The standard addresses flexible, single-core cables with cross-linked insulation and a cross-linked sheath for the DC side of photovoltaic systems.

IEC 62930 also covers single-core cross-linked insulated cables with a cross-linked sheath for photovoltaic DC applications, with a rated DC voltage up to 1.5 kV. Both standards are relevant references when reviewing cable suitability, but buyers should confirm the product's certified construction and scope rather than relying on a standards name alone.

For international projects, verify the cable construction, conductor size, rated voltage, temperature conditions, and certificate scope against the installation requirements. The required documentation may also depend on the destination market and project specifications.

FRCABLE lists this product as meeting TÜV EN 50618 and IEC 62930 requirements. Request the current certificates and technical datasheet before treating compliance as confirmed for a specific order.

Stranded Tin-Plated Copper Conductor

The product specification identifies a stranded tin-plated copper conductor. This is an important distinction between this cable and the aluminum-alloy PV cable listed separately in the FRCABLE product range.

Conductor material and cross-sectional area influence electrical resistance and cable selection. Buyers should verify the conductor size and maximum conductor resistance for the part number they intend to purchase.

FRCABLE's published table includes 4.0 mm², 6.0 mm², and 10 mm² variants. The appropriate size depends on the system's design current, allowable voltage drop, installation method, ambient conditions, and applicable electrical rules.

When comparing quotations, review conductor cross-section, maximum conductor resistance, insulation thickness, sheath thickness, and outer diameter. These details can affect compatibility with connectors, cable routing, and installation arrangements.

Cross-Linked Insulation and Protective Sheath

The published specification lists black cross-linked insulation and an outer sheath available in black or red. The product image shows these two jacket colors with the conductor exposed at the ends.

Red and black cable options can support clear conductor identification where they are used according to the project's wiring design. Confirm which colors and part numbers are available for the required order quantity.

The supplier describes this cable as using electron-beam cross-linked compounds and lists resistance to UV radiation, ozone, fluids, oil, salt, and general weathering. The product information also identifies halogen-free, flame-retardant, and low-smoke characteristics.

These properties should be checked against the product's applicable test reports and certification documentation before being used as contractual compliance claims. Buyers should request current supporting information when a particular environmental or fire-performance requirement is important to the project.

Outdoor Performance for Solar Installations

PV cables may be exposed to sunlight, moisture, temperature variation, and other environmental conditions during their service life. Cable selection should therefore consider the installation environment, the cable's documented characteristics, and the requirements of the system.

FRCABLE lists an ambient temperature range of -40°C to +90°C. Its technical data also refers to a conductor operating temperature range extending to +120°C. Under IEC 62930, normal continuous maximum conductor temperature is 90°C, while operation at 120°C is permitted only for a limited duration specified by the standard.

For this reason, buyers should not interpret +120°C as an unrestricted continuous operating temperature. Confirm the precise conditions in the approved datasheet and the applicable standard before using the values in a design specification.

For rooftop systems, commercial PV installations, and ground-mounted solar farms, the final cable selection should be based on the actual environment, installation method, electrical design, and local requirements.

Available Cable Sizes and Color Options

FRCABLE's published product range includes 4.0 mm², 6.0 mm², and 10 mm² conductor sizes, with black and red sheath options.

For project procurement, request the part-number-specific dimensions and verify the relevant cable size before ordering. The published data gives the following approximate dimensions:

• 4.0 mm²: Approximate outer diameter of 5.7 mm.
• 6.0 mm²: Approximate outer diameter of 6.2 mm.
• 10 mm²: Approximate outer diameter of 7.2 mm.

The published maximum conductor resistance values are 5.09 mΩ/m for 4.0 mm², 3.39 mΩ/m for 6.0 mm², and 1.95 mΩ/m for 10 mm². Confirm these values in the latest datasheet before using them in engineering calculations.

Cable size should not be selected by cross-section alone. The responsible electrical designer should consider current, voltage drop, installation method, ambient temperature, cable grouping, and applicable electrical requirements.

Wholesale EN 50618 H1Z2Z2-K Solar Cable Through Pinpoki

For solar project developers, EPC contractors, electrical distributors, and importers, cable sourcing involves verifying both technical suitability and commercial requirements. Buyers should confirm the conductor size, jacket color, voltage rating, product certification, packaging, delivery schedule, and available documentation before placing an order.

Pinpoki helps international buyers discover products and explore potential suppliers from China. This FRCABLE listing provides a starting point for researching EN 50618 H1Z2Z2-K cable and requesting product information for a specific project.

Browse the Pinpoki Solar Cable category to compare related products, or visit the FRCABLE supplier store on Pinpoki to review other listed products from the same supplier.

Before confirming a purchase, request the current datasheet and relevant certificates for the selected cable size. Clarify the minimum order quantity, unit price, sample availability, production lead time, payment terms, and delivery arrangements directly with the supplier.

What to Confirm Before Ordering

Before purchasing this EN 50618 H1Z2Z2-K solar cable, verify the following details:

• Conductor: Confirm stranded tin-plated copper and the required cross-sectional area.
• Insulation and sheath: Verify material formulation, thicknesses, and available colors.
• Voltage rating: Confirm the 1500V DC rating and applicable certification scope.
• Temperature conditions: Verify ambient and conductor temperature limits in the approved datasheet.
• Dimensions: Request the cable outer diameter, insulation thickness, sheath thickness, and conductor resistance for the selected part number.
• Certificates: Ensure current documents match the product construction, cable size, and applicable standard.
• Commercial terms: Confirm pricing, minimum order quantity, sample availability, packaging, lead time, and shipping requirements.

Confirming these details helps ensure that the selected cable matches the technical and purchasing requirements of the intended PV project.

Frequently Asked Questions

What is EN 50618 H1Z2Z2-K solar cable used for?

It is a photovoltaic cable type covered by EN 50618 and intended for applications defined by the standard. Its suitability for a particular installation depends on the approved construction, certification, and system requirements.

What is the rated voltage of this FRCABLE cable?

The product specification lists a rated voltage of 1500V DC. Buyers should verify the current product datasheet and applicable certificate for the selected part number.

Which conductor sizes and colors are available?

The published range lists 4.0 mm², 6.0 mm², and 10 mm² options in black and red. Confirm the current part numbers and availability with the supplier before ordering.

What is the difference between EN 50618 and IEC 62930?

Both standards cover photovoltaic DC cables with cross-linked insulation and sheath, but they are distinct standards documents. Buyers should confirm the required standard and certificate scope for their project and target market.

Can the cable be used outdoors?

The supplier describes UV, ozone, water, and weathering resistance. Confirm the supporting documents and installation suitability for the environmental conditions and applicable requirements.

How can I source FRCABLE solar cable through Pinpoki?

Browse the Pinpoki Solar Cable category, review the FRCABLE listing, and request the latest datasheet, certificates, quotation, and delivery terms for your required size and quantity.