TIGER FS460DME Industrial-Grade Central Motor for Roller Shutter Doors

The central motor for roller shutter doors from the TIGER FSDME series is designed for compatible rolling shutter systems that require high torque and a central shaft-mounted drive arrangement. The FS460DME product designation supplied for this listing positions the motor for industrial door automation buyers, rolling shutter manufacturers, installation contractors, and building hardware distributors. Listed on Pinpoki, this product gives international buyers a starting point for exploring door automation equipment and potential suppliers. Before ordering, buyers should verify the precise model designation, mechanical dimensions, electrical requirements, and compatibility with the intended shutter assembly. Public specifications for the 460 Nm configuration of the TIGER FSDME series list an electronic brake, a three-stage planetary reduction mechanism, and a drive arrangement designed for compatible industrial rolling shutters. These features should be checked against the supplier's current technical documentation for the exact model being quoted.

Central Motor for Roller Shutter Doors with 460 Nm Torque

Torque is an important factor when selecting a central motor for roller shutter doors. Public product data for the TIGER FSDME series lists a 460 N·m configuration with an output speed of 9.5 rpm. These values provide a useful starting point for comparing industrial motor options. However, rated torque alone does not determine whether a motor is suitable for a specific door. Shutter dimensions, curtain weight, balancing system, shaft arrangement, friction, and operating frequency all affect the required drive configuration. For an industrial installation, buyers should provide the shutter width and height, estimated curtain weight, shaft diameter, pulley requirements, and expected usage when requesting a quotation. A qualified installer or the shutter manufacturer should verify that the motor matches the complete door system. Do not choose a motor solely because its torque rating appears sufficient. Correct selection requires reviewing the motor's approved application range and the mechanical characteristics of the actual shutter.

Three-Stage Planetary Gearbox and Transmission Design

The published TIGER FSDME product information describes a three-stage planetary reduction gear mechanism. It also refers to powder metallurgy gears that undergo high-frequency hardening and a powder metallurgy travel slider. These transmission components are intended to support torque transmission and positioning within the motor assembly. For buyers comparing industrial central motors, gearbox architecture and component construction are relevant considerations alongside rated torque and output speed. The supplier also describes precision-machined housing construction and improved heat dissipation. Before using specific durability or noise-reduction claims in a commercial specification, request the applicable product documentation or test information. When evaluating the motor, ask for the technical drawing, mounting dimensions, gearbox details, shaft compatibility, and a list of included mechanical components. This helps confirm whether the model can be integrated into the proposed shutter assembly.

Electronic Braking and Limit Control

Electronic braking is an important feature to evaluate in a motor used for a rolling shutter system. The product listing identifies an electronic brake designed to help control movement and stopping. The public specifications also list a maximum limit-switch travel of 6 m. Buyers should confirm the actual limit-adjustment mechanism, the available travel range, and the procedure for setting the upper and lower stopping positions. Correctly configured limits help the shutter stop at the intended positions. The brake, limit-control system, and the rest of the shutter assembly must work together according to the manufacturer's instructions. Before ordering, confirm which brake and control components are included. Do not assume that the motor alone includes a controller, remote receiver, warning light, electronic lock interface, or all accessories required for a complete automatic shutter installation. For industrial or commercial applications, installation and commissioning should be performed by qualified personnel. The complete system should be checked for proper mechanical alignment, door balance, limit settings, and the safety devices required for the installation.

Electrical Specifications and Operating Requirements

The public TIGER FSDME series information lists a supply range of 110V/60Hz to 230V/50Hz for the described series. The 460 Nm configuration is listed with 1430 W absorbed power and 6.22 A current consumption. These figures must be verified against the exact product's nameplate and current datasheet before they are used for engineering or procurement decisions. Supply voltage, frequency, wiring configuration, current, power, and protection requirements must match the installation site. The public specifications also list a four-minute thermal cut-out value. Confirm the meaning of this value with the supplier, including the applicable duty cycle, reset conditions, and thermal protection behavior. It should not be interpreted as evidence that the motor supports unlimited continuous operation. Electrical connection, commissioning, and maintenance must follow the manufacturer's instructions and local electrical requirements. Where a separate control unit is required, its compatibility and availability should be confirmed before placing the order.

Shaft, Tube, and Pulley Compatibility

The published 460 Nm configuration lists a 76 mm tube arrangement and a 240 mm pulley. These dimensions are important when checking compatibility with the shutter's shaft and drive system. A central motor must be matched to the intended mechanical assembly. Differences in tube diameter, pulley size, shaft construction, and mounting arrangement can prevent a motor from being installed correctly or can introduce unwanted loads into the system. For replacement projects, identify the existing motor model and measure the relevant mechanical components before ordering. For new installations, provide the shutter manufacturer or installer with the motor's technical drawing so that the complete assembly can be designed around compatible components. Buyers should also confirm whether the quotation includes reducers, crowns, adapters, mounting hardware, and any other components needed for installation.

Industrial Applications for TIGER Central Motors

The TIGER FSDME series can be evaluated for compatible industrial rolling shutters and commercial door systems. Potential applications may include warehouses, factory access points, shopfront shutters, and other installations where the door design requires a high-torque central drive. Application suitability depends on the shutter's construction, load, balance, operating frequency, environment, and required controls. A motor designed for one installation should not automatically be assumed suitable for all large doors. For high-frequency use, ask the supplier to confirm the permitted duty cycle and thermal limits. For heavy shutters, the responsible installer should evaluate the door weight and balancing mechanism as part of motor selection. The stated 460 N·m torque is a motor specification, not a universal maximum shutter-weight rating. Use the manufacturer's approved application guidance when determining whether the motor is suitable for a particular door.

Wholesale Central Motor Sourcing Through Pinpoki

For rolling shutter manufacturers, door automation installers, industrial hardware wholesalers, and importers, sourcing a central motor involves both technical and commercial verification. When requesting a quotation, provide the required model, door dimensions, estimated load, shaft and pulley information, destination market, quantity, and any electrical requirements. Ask the supplier to confirm the exact model designation, rated torque, output speed, travel limits, brake configuration, and included components. Pinpoki helps international buyers discover products and explore potential suppliers. The Pinpoki product catalog provides a starting point for researching door automation components and related equipment. Before purchasing, confirm the minimum order quantity, unit price, sample availability, production lead time, payment terms, warranty, shipping arrangements, and spare-parts support. Request the current datasheet and installation manual for the exact model before approving the order. Comparing suppliers against the same specification makes it easier to understand differences in configuration, included accessories, and commercial terms.

What to Confirm Before Ordering

Before purchasing the TIGER FS460DME industrial-grade central motor, verify the following information:

• Model designation: Confirm whether FS460DME is the exact model name or a variant of the TIGER FSDME series.
• Torque and speed: Verify the rated torque of 460 N·m and output speed of 9.5 rpm for the selected motor.
• Electrical requirements: Confirm voltage, frequency, current, absorbed power, wiring, and protection requirements.
• Mechanical compatibility: Check tube diameter, pulley size, shaft arrangement, adapters, and mounting components.
• Braking and limit control: Confirm the electronic brake, limit-switch range, and adjustment procedure.
• Thermal protection and duty cycle: Clarify the four-minute cut-out information and the permitted operating conditions.
• Commercial terms: Confirm price, minimum order quantity, packaging, lead time, warranty, and spare parts.

Verifying these details before ordering helps ensure that the supplied motor matches the requirements of the intended shutter system.

Frequently Asked Questions

What is the rated torque of the TIGER FS460DME?

Public specifications for the 460 Nm configuration of the TIGER FSDME series list 460 N·m torque and 9.5 rpm output speed. Confirm these values with the supplier for the exact FS460DME model.

What shaft and pulley sizes are listed?

The public 460 Nm specification lists a 76 mm tube arrangement and a 240 mm pulley. Verify these dimensions against the current technical drawing and the shutter assembly.

Does the motor include an electronic brake?

The published TIGER FSDME series product description identifies an electronic brake. Confirm the brake configuration and included components for the selected model before ordering.

What power supply does the motor support?

The public series information lists 110V/60Hz to 230V/50Hz. The exact supported supply must be confirmed from the specific motor's nameplate and current datasheet.

Can the motor operate a 380 kg roller shutter?

The public product table includes a value of 380 in the lifting column for the 460 Nm configuration, but the column labeling is not sufficiently clear to treat this as a confirmed maximum door weight. Ask the supplier to confirm the unit, load conditions, and permitted application range before specifying the motor for a 380 kg shutter.

How can I source this motor through Pinpoki?

Use the Pinpoki product catalog to explore available products and suppliers. Provide the supplier with the shutter dimensions, load, shaft details, electrical requirements, and required quantity, then request the current datasheet and quotation.